"Event-triggered SMC-based FRT Approach for DFIG-based Wind

"Event-triggered SMC-based FRT Approach for DFIG-based Wind Turbines Eq" by Md Nafiz Musarrat, Afef Fekih et al.

This paper proposes an event-triggered sliding mode control (SMC)-based fault ride through (FRT) strategy for doubly-fed-induction-generator (DFIG)-based wind turbines. An event-triggered SMC (ETSMC) approach is designed for a dynamic voltage restorer (DVR) with a high frequency isolated dc-dc converter. The aim is to regulate the stator terminal voltage by injecting appropriate voltage to regulate it near the reference point. Since the control signal in the event-triggered SMC is only updated when certain conditions are violated, the proposed approach results in reduced computational burden and channel bandwidth. Additionally, it reduces the chattering phenomena typically associated with SMC and reduces harmonic distortion. The ETSMC is augmented by a disturbance observer to further improve its robustness against mismatched uncertainties. The DVR topology considered in this paper utilizes high frequency isolation transformer, which dramatically reduces the costs associated with the regular isolation transformer. The proposed FRT strategy is validated with a DFIG-based wind turbine connected to a test microgrid. The obtained results confirmed the effectiveness of the proposed approach in mitigating dynamic instabilities resulting from grid faults while minimizing the usage of the communication channel.

Related Keywords

, Dynamic Voltage Restorer , Event Triggered Smc , Fault Ride Through , High Frequency Transformer , Wind Turbines , High Frequency , Converters , Stators , Urges , Voltage Control , Wind Energy ,

© 2025 Vimarsana