Vimarsana
Biggest News Aggregation in the World

Page 8 - Mechanical Properties News Today : Breaking News, Live Updates & Top Stories | Vimarsana

Stay updated with breaking news from Mechanical Properties. Get real-time updates on events, politics, business, and more. Visit us for reliable news and exclusive interviews.

Top News In Mechanical Properties Today - Breaking & Trending Today

"Achieving balanced strength-ductility of heterostructured TiC/graphene" by Fei Lin, Mengyuan Ren et al. - Vimarsana News

"Achieving balanced strength-ductility of heterostructured TiC/graphene" by Fei Lin, Mengyuan Ren et al.

Heterostructured Al/10 vol% (TiC-GNPs) composites were produced by powder metallurgy (PM) with different TiC-to-GNPs volume ratios. As the TiC-to-GNPs ratio decreases, the improved dispersion of TiC in the matrix is achieved and the heterostructure of the composite is optimised due to the decreased TiC fraction and increased interaction between TiC and GNPs. Besides, compressive properties of the composite are improved significantly, and a balance of the significantly increased strength (σYS of 481.0 MPa and σUCS of 651.4 MPa) and reasonably remained ductility (εf of 10.9%) is achieved in t...

Source: uow.edu.au
"Strengthening and toughening of Ti5Si3 by TiC-coated short carbon fibe" by Yi Xiong, Wanli Wang et al. - Vimarsana News

"Strengthening and toughening of Ti5Si3 by TiC-coated short carbon fibe" by Yi Xiong, Wanli Wang et al.

Composites of Cf/Ti5Si3 were prepared by spark plasma sintering a mixture of TiC-coated short carbon fiber and pre-synthesized Ti5Si3 powder. The TiC coating protects the Cf and mediates a mild interdiffusion process between Cf and Ti5Si3, rather than an exothermic reaction. Compared with traditional in-situ fabrication, the use of a pre-synthesized Ti5Si3 powder as a raw material mitigated heat release from the Ti-Si reaction and consequent grain overgrowth. The spark plasma sintering process was completed within 15 min and the relative density of the product reached 99.2 %. The Cf/Ti5Si3 com...

Source: uow.edu.au
Deep-learning system explores materials' interiors from the outside | MIT News | Massachusetts Institute of Technology - Vimarsana News

Deep-learning system explores materials' interiors from the outside | MIT News | Massachusetts Institute of Technology

An MIT machine-learning method detects internal structures, voids, and cracks inside a material, based on data about the material’s surface.

Source: mit.edu
How is 2205 Duplex Stainless Steel Impacted by Heat Treatment? - Vimarsana News

How is 2205 Duplex Stainless Steel Impacted by Heat Treatment?

This article discusses the impact of heat treatment on the development of the microstructure and corrosion resistance of weldments made of 2205 duplex stainless steel (DSS). It also provides an overview of the properties and applications of DSS.

Source: azom.com
"Microstructure evolution and mechanical properties of a Fe, Cr-rich mu" by Minghao Hu, Chong Li et al. - Vimarsana News

"Microstructure evolution and mechanical properties of a Fe, Cr-rich mu" by Minghao Hu, Chong Li et al.

In this paper, a Fe, Cr-rich multiphase Ni3Al-based alloy is joined through transient liquid phase bonding (TLP) technique. Different from typical γ+γ′ dual phase Ni3Al-based alloys, the joint can be divided into three distinct zones: isothermal solidification zone (ISZ), gamma prime zone (GPZ) and diffusion affected zone (DAZ). Interestingly, the massive fine grains with γ+γ′ dual phase are observed inside the ISZ, and the GPZ consists of blocky γ′ phase. The precipitation of Cr-rich borides in DAZ provides an advantageous compositional condition for the local coarsening of γ′ p...

Source: uow.edu.au