Windows & Linux Drivers for the Expresso DMA Core The Northwest Logic Expresso DMA Driver from Rambus is specifically designed to be used with the Expresso DMA Core. It supports all DMA modes supported by the Expresso DMA Core. Together the driver and core provide a complete, pre-packaged, flexible DMA system.
The Expresso DMA Driver includes support for:
• Device registers and memory reads and writes
• DMA read and write transfers
• Low-level performance statistics
• Legacy, MSI, MSI-X interrupts
The Expresso DMA Driver creates and manages descriptor chains in system memory. The Expresso DMA Core then fetches and executes these descriptor chains. This approach enables the descriptor chain size to be maximized while minimizing the need for large descriptor memories in the Expresso DMA Core.
Bluetooth Controller Synopsys’ DesignWare® Controller IP for Bluetooth low energy, Thread, and Zigbee delivers secure, concurrent wireless connectivity for Internet of Things (IoT) applications such as wearables, industrial, smart homes, and smart cities. The controller incorporates advanced data encryption and random number generation for secure wireless connections, and allows multiple simultaneous connections between supported protocols in a single instantiation. It also provides validated interoperability with software stacks through a physical or a virtual Host Controller Interface (HCI). The IP is delivered as RTL and firmware corresponding to an optimized IP partition to minimize system power dissipation and allow for functionality upgrades through software updates. The firmware runs on an external processor that can either be a dedicated processor or host processor. The controller is thoroughly tested and qualified in accordance with the Bluetooth Special Interest Gr
The S3ADSD24M14BC40LP is a compact, low power 14-bit ADC IP implemented with a Continuous-Time Sigma-Delta Modulator.
With an input signal bandwidth of 12MHz, this ADC features an outstanding dynamic performance including 69.0dB
SNR, 75.0dB SFDR and 11.0-bit ENOB.
This IP includes also the Voltage Reference Buffers and the Digital Decimation Filter. The throughput rate, after decimation, is 50MS/s.
The total IP, including the References Buffers and the Decimation Filter, dissipates a total power of mW and the die area is tiny.
The S3ADSD24M14BC40LP can be cost-effectively ported across foundries and process nodes upon request.
MIPI M-PHY Gear4 IP (Silicon Proven in UMC 28HPC+) The MIPI M-PHY Gear 4 IP is compliant with the latest MIPI Feature Storage IP Solution SerDes PHY Product Brief Alliance M-PHY v4.1 Specification, UniPro v1.8 Specification, and Universal Flash Storage (UFS) v3.0 Specification. A serial interface technology with high bandwidth capabilities and supports HS Gear4 rates up to 11.6Gbps, which is particularly developed for mobile applications to obtain low pin count combined with very good power efficiency. The MIPI M-PHY Gear 4 IP compliant to the RMMI interface which allows UniPro controller and UFS Controller. The MIPI M-PHY provides robust testability by low cost Build-In-Self-Test (BIST), and receiver eye data monitoring and debugging function for embedded system.
Comcores 10G/25G Ethernet MAC provides a complete IEEE 802.3 Ethernet Layer 2 solution. The MAC IP core performs the Link function of the 10G/25G Ethernet .