capacity on the surface to deal with that. we will then in sequence close the middle ram here which will stop the flow out of the top of the stack and then we will take pressure readings. we will then close the kill line and take pressure readings. following that, we will use a remotely operated vehicle that will hook on to the little bar here that actually turns a valve and this choke line has been especially constructed if you looked at the video, you'll see kind of a yellow object with a curved up pipe. that is the choke line. that is the last way for oil to leave the capping stack. we will slowly close that very, very slowly in partial turns and measure pressure at the same time. in that manner we will slowly close the entire capping stack and start reading pressure. okay? as we do that, we'll be watching