drag link and tie rod - direction? I've been spending a few minutes at a time with my new to me 84 CJ7 and wanted to correct the steering wheel orientation. After finding the steering wheel was installed in the correct spot (alignment marks), I checked the pitman arm and found that it can only go in one location. After ruling out the steering wheel and the pitman arm, that leaves an incorrect adjustment to the drag link and tie rod end. I started turning it only to find the previous owner had probably used a pipe wrench to turn it and collapsed it thereby preventing it from being adjusted enough to correct the steering wheel. I did a little searching and found the adjusting tube is always shown nearest the pitman arm, mine however is located at the other end - the drag link is in backwards! So my question is, does it really matter?