STL231: Fancy router tables vs. plywood with a hole in it
STL231: Fancy router tables vs. plywood with a hole in it Mike and Ben discuss oddball panel glue-up theories, the need for a fancy router table, smooth moves, and Mike's upcoming book. Dec 18, 2020 From Paul: Let’s say one is making a wider panel or tabletop from solid stock so that a glue-up is required to obtain the necessary width. When preparing the stock, I know there are valid reasons for ripping the boards into narrower strips. The board might be wider than your jointer, or your stock might be cupped enough that you will end up too thin if you try to remove all the cup at ...
Source: finewoodworking.com