Tensile Testing News Today : Breaking News, Live Updates & Top Stories | Vimarsana

A bidirectional powder deposition strategy was employed to additively manufacture Ti–15Mo wt% using laser metal deposition. The as-built alloy was subsequently subject to post-fabrication heat treatment. Microstructural characterisation was conducted in the heat-treated state and also after uniaxial tensile deformation. X-ray diffraction, energy dispersive spectroscopy and scanning electron microscopy were employed in the heat-treated state. Electron backscatter diffraction was used in investigating the deformed microstructure. Columnar β grain refinement was achieved by fragmentation from ...

Ghaziabad (Uttar Pradesh) [India], January 31 (ANI/PRNewswire): Pacorr Testing Instruments has recently enhanced its product line by launching the all-new version of tensile testing machine i.e

While Concord Control, already had a strong listing, the scrip built on gains and is up 355 per cent since its October 10 listing. Silicon Rental Solutions did not had stellar listing on October 10, but the scrip has jumped 117 per cent since

High yield strength (710–862 MPa) ferritic microalloyed steels are developed through the combined contribution of Nb, Mo, V, and Cr microalloying and controlled thermomechanical treatment. Microstructures and mechanical properties are characterized using advanced microscopy techniques and uniaxial tensile testing. NbV carbonitrides with/without Mo (depending on steel composition) are formed in austenite and range from 30 to 70 nm in average diameter. However, V- and Cr-rich interphase (3–7 nm range) and random (1–6 nm range) precipitates are found in polygonal ferrite. An increase in rou...

Mechanical testing is a way of testing and measuring the properties of materials. Machines/instruments are available to test materials or finished products in a range of different ways.