"Microstructure and mechanical behavior of Ti—Cu alloys produced by sem" by Kaio NIITSU CAMPO, Caio Chaussê de FREITAS et al.
The mechanical properties of Ti—Cu alloys processed via thixoforming were evaluated. Ti—Cu (25, 27, and 29 wt.% Cu) ingots were produced via arc melting, homogenization at 950 °C for 24 h, and hot-forging at 900 °C, followed by thixoforming at a speed of 8 mm/s after isothermal heat treatment at 1035 °C for 300 s. The thixoformed alloys exhibited good mechanical strength, limited plasticity under tensile loading, and reasonable plasticity under compressive loading. The mechanical strength...
Source: uow.edu.au