Mini lathe feed | Model Engineer
You need to check the geartrain/change gear set up behind the left cover. 1 with lathe unplugged, first release quadrant to free change gear mounted to leadscrew from any other gears in the train. 2 turn the change gear on leadscrew manually to check leadscrew rotates, if so, engage carriage feed lever to check for expected movement forward and reverse - if carriage is not moving then investigate for correct movement of half nuts (by peering at right end of carriage with a torch to confirm that the half nuts move together and apart to clasp the leadscrew). 3) if that checks out alright, check...